Support for Microsoft Windows® 7
This page provides the information on the support of GP-Pro EX Ver. 2.7 for Microsoft Windows® 7 operating system (hereinafter referred to as “Windows 7”).
Please refer to this information for your system applications.
| Category | Software | Windows® 7 Support |
|---|---|---|
| Screen Editor Software | O | |
| Related software and tools | Transfer Tool *2 | |
| Project Converter | ||
| Pass-through | ||
| WinGP | ||
| Device/PLC Data Copy Tool | ||
| RPA related tools *3 | ||
| GP-Viewer EX | ||
| Web-Server | ||
| Camera-Viewer EX | ||
| Movie Converter | X | |
| GP Remote Printer Server | ||
| Pro-face Converter | ||
| Pro-Server EX Ver. 1.2 |
*1 The following features of GP-Pro EX are not supported.
- Connection to the external PLC simulator
*2 Update "USB Data Transfer Driver", when the following phenomena occur on Microsoft Windows® 7.
- When an error occurs when GP-Pro EX or Transfer Tool is installed.
- When an error occurs when a screen data is transferred by using USB Transfer Cable (Model#: CA3-USBCB-01)
*3 Except for rdp2vnc.
MEMO
- We performed the operation check with GP-Pro EX Ver. 2.7. For users who use the
version less than Ver. 2.7. >> Version Confirmation
- The following table shows the editions of Windows® 7 which are supported by GP-Pro EX.
O: Supported, X: Not SupportedEdition of Windows® 7 32 bit 64 bit Ultimate O X Enterprise O X Professional O X Home Premium O X Home Basic O X Starter O X
Version Confirmation
- Select [Version Info(A)] in the [HELP(H)] menu.
- The version is shown in the red box below.
 |
| Protection of Personal Information | Trademark Acknowledgments | Terms of Use |
| © Copyright 2004-2012. Pro-face. All rights reserved. |