2009 > Feb 10

GP-Pro EX:Important Notification for Users of OMRON C/CV/α series

We would like to express our appreciation for using Pro-face products.
We have confirmed that the following symptom occurs in GP-Pro EX.
The defect symptom and the corrective actions for this problem are indicated below.
We apologize for the inconvenience.

Symptom description

When the PLC of OMRON C/CV/α series is in operation in "Program Mode" and GP-Pro EX is set to permit "Change to Monitor Mode", the PLC mode is changed to the "Monitor Mode" when you turn on the power with a display unit connected
(We confirmed that this symptom does not occur in other PLC products.)

Applicable version

• GP-Pro EX Ver.2.22.000 or earlier
• OMRON C/CV series Hot Link driver V1.11.03 or earlier

Solution

Update the GP-Pro EX Hot Link driver to the latest version (V1.11.04) and then transfer your project to a main unit.

Obtain the update module from the download site to update GP-Pro EX
* Membership registration (free) for our technical support site is needed.

→ Ver. 1.11.04 Update page

Inquiries

If you have any questions, please contact our sales office in your country or region.
For contact information, please visit the following site.

URL: https://www.hmisource.com/otasuke/contactus/worldwide2.htm

February 10, 2009
Pro-face America