Technical Resources

Software Update Module / Add-on Software

>Pro-Server with Pro-Studio Update >Pro-Server with Pro-Studio Ver. 4.57 Update Module

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Digital shall retain all intellectual property rights to the files that Digital provides for this service.
You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.

Notices:

Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.

Download

Note:

This program should be run on a PC on which Pro-Server with Pro-Studio Ver. 4.5 or later has been installed.
Do not uninstall Pro-Server with Pro-Studio before installing update.
This update overwrites only the parts to be updated.
Be sure to close Pro-Server with Pro-Studio application before starting installation.
If you install Pro-Server with Pro-Studio with the setup type "Custom", please be aware of the following.
If action functions or OPC Server are added from the master CD after Pro-Server with Pro-Studio is updated to Ver. 4.57 with this program, the action functions or OPC Server will not be updated to Ver. 4.57.
In this case, please uninstall Pro-Server with Pro-Studio, and reinstall Pro-Server with Pro-Studio with your desired action functions or OPC Server, and then run this upgrade package to use the added actions with Pro-Server with Pro-Studio Ver. 4.57.

Title	Pro-Server with Pro-Studio Ver. 4.57 Update Module
File Name	Pro-ServerV457.exe
File Size	1,334KB
Applicable Version	Pro-Server with Pro-Studio Ver. 4.50 or later
File Description	Module for updating Pro-Server with Pro-Studio to Ver. 4.57
Update Description	See ProStudioV457_FixedDefectsList.txt.

Module Installation (This is a self-extracting file)

This program should be run on a PC on which Pro-Server with Pro-Studio Ver. 4.50 or later has been installed.
Do not uninstall Pro-Server with Pro-Studio because this installer overwrites only the parts to be updated.
Be sure to close programs of Pro-Server with Pro-Studio before starting installation.

Installation Procedure

Downloading "Pro-ServerV457.exe" Click on "Pro-ServerV456.exe" and download the data to the desired folder on your PC.
Be sure to close programs of Pro-Server with Pro-Studio before starting installation.
After the download is completed, double-click on the "Pro-ServerV457.exe" file to start installation.
Follow the installer program's directions.
When installation is completed normally, " Setup completed." is displayed.
If there are any problems and installation can not be completed, contact our company.

Update History:

[Ver. 4.57] (Sep. 25, 2008)

[Ver. 4.56] (Sep. 27, 2007)

See readmee.txt

[Ver. 4.55] (Jun. 29, 2006)

The following functions have been improved.The following issues were resolved in Ver. 4.55

After a certain period of time, Pro-Server would not get the provider information from other Nodes.
The print of File menu sometimes does not work when the position of Symbol printing overlaps the position of form feed.
When a specific 2-Way error occurs, the transferring over Ethernet does not work.

When the C-Package project file including Symbol with a lower-case character is imported, this Symbol can't be edited on Pro-Stuido.
*Warnings

1)	As a result of this modification, the lower case character included in the Symbol of the imported C-Package project file will be changed to upper-case character on Pro-Studio.
2)	Symbol with double-byte lower-case character can not be edited on Pro-Studio.

[Ver. 4.54] (Aug. 17, 2005)

The following functions have been improved.

When "GP Type" is set besides "GLC Series" in screen project, "Import C-Package Symbol" is executed specifying it, and the network project is transferred to GP, 2Way error(41:01:00:000) might be displayed on the GP screen.
When a network project in which Provider Information exceeds 350 is registered is opened with Pro-Studio, application error might be generated.
When two or more values are specified in "TYPE" or "NUMBER" column of "Automatic Upload of Access Data" action, the error might occur in uploading.
When an error occurred with ReadDeviceVariant API of Simple DLL Function, the application that called API might locked.
Receiving buffer of PC running Pro-Server Ver 4.54 has been increased to prevent packet loss under certain conditions.

[Ver. 4.52] (Mar. 18, 2005)

The following setting were added:

[Ver. 4.51] (Jun. 14, 2004)

The following function have been improved.

In "Import C-Package Symbol", when a project in which GP type has been set GLC series in GP-PRO/PB III C-Package is specified, it may impossible to import all the symbols.
When selecting a CSV file in the "Automatic Download of GP Filing Data" dialog, if the CSV file was created as unchecked zero suppress and saved as .csv in an "Automatic Upload of GP Filing Data" action, an error message appeared.
When downloading an Excel file in the "Automatic Download of GP Filing Data" action, if the Excel file was created and saved as .xls in an "Automatic Upload of GP Filing Data" action, an error message would appear in the Log Viewer and the download would stop.
When multiple "Upload of GP JPEG Data" actions are executed at the same time as 2-way event on some GP units, data cannot be uploaded and an error message appears in the Log Viewer.

When "Windows Security Alert" is displayed.
--> For further information, click here.

Last Updated : Sep. 25, 2008