 |
| Driver Download |
|
|
| > PLCs > Schneider Modbus TCP Ethernet Protocol |
|
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
| Title |
Schneider Modbus
TCP Ethernet Protocol |
| File Name |
MODBUS_E.exe |
| File Size |
1,331KB |
| Supported Software |
GP-PRO/PBIII C-Packge03
V7.2x
Pro-Server with Pro-StudioV4.1 or later |
| Supported PLCs |
Premium, Quantum
Series |
| Supported Units |
- GP Series
GP77R Series , GP2000 Series
- GLC Series
GLC2000 Series
- Factory Gateway Series |
| PLC Connection Manual |
For details, please
read the following PDF:
Schneider
PLC Premium/Quantum eries ( Ethernet Cmmunication
) (PDF:165KB) |
|
Installation (The downloaded file is self-extracting.) |
| 1. |
Prior to installing the driver, close all your personal
computer applications, including
any resident program such as virus detection program, etc. |
| 2. |
Click on the above file [MODBUS_E.exe] to download
the data to desired folder. |
| 3. |
After the download to your PC is finished, double-click
on the file ’s icon to start the installer program. |
| 4. |
After the installer starts, follow the instructions
given on each screen.
The installer’s default setup folder is for installing the
driver to GP-PRO/PBIIIC-Package03. |
| 5. |
After installation,
When using GP-PRO/PBIII C-Package03
Click on the Device/PLC area’s [Schneider] selection and
select [Schneider Modbus TCP (ETHER)].
When using Pro-Server with Pro-Studio
Select [Schneider Modbus
TCP (ETHER)] for the “PLC Type”
*When using the
driver, be sure to refer to the
PLC Connection Manual PDF (Shown
above). Also, for general information
regarding PLC connection and documentation
conventions please refer to your own Device/PLC Connection
Manual. |
|
| Last Updated: February 14.2006 |
|
