 |
| Driver Download |
|
|
| > Inverters > Toshiba
Schneider Inverter Protocol |
|
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
| Title |
Toshiba Schneider Inverter
Protocol |
| File
Name |
TOSVERT.exe |
| File
Size |
1,299KB |
| Supported
Software |
GP-PRO/PB III for Windows
Ver. 5.0 or later
Pro-Server with Pro-Studio Ver. 3.0 or later
LT Editor Ver. 1.0 or later |
| Supported
Controller |
VF-S9 Series, VF-nC1 Series,
VF-S11 Series, VF-A7 Series |
| Supported
Units |
ST Series(ST400-AG41-24V/ST401-AG41-24V)
GP Series(GP377/GP77R/GP2000 Series)
GLC Series (GLC2000 Series)
LT Series
Factory Gateway Series |
| PLC
Connection Manual |
For details, please read the
following PDF:
PLC Connection Manual Additional Manual
VF-S9/VF-nC1/VF-S11/VF-A7
Series (PDF:176KB) |
|
Installation (The downloaded file is self-extracting.) |
| 1. |
Prio to installing the driver,
close all your personal computer applications,
including any resident program such as virus
detection program, etc. |
| 2. |
Click on the above file name
to download the data to desired folder. |
| 3. |
After the download to your
PC is finished, double-click on the file's
icon to start the installer program. |
| 4. |
After the installer starts,
follow the instructions given on each screen.
The installer's default setup folder is for installing the driver to GP-PRO/PB
III for Windows. |
| 5. |
After installation, when using
GP-PRO/PB III for Windows Ver. 5.x, LT Editor
or Pro-Server with Pro-Studio, select [TOSHIBA
SCHNEIDER INVERTER] for the "PLC Type".
When using GP-PRO/PB III for Windows Ver. 6.0 or later, click on the Device/PLC
area's [other] selection and select [TOSHIBA SCHNEIDER INVERTER].
* When using the driver, be sure to refer to the PLC
Connection Manual PDF (Shown above). Also, for general information regarding
PLC connection and documentation conventions please refer to your own Device/PLC
Connection Manual. |
|
| Last Updated: March.18.2004 |
|
