PL Series
>PL3000 Series >System Monitor for PL3000 Series
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
- Install this system monitor in the following cases:
- When customers who have used the type without a preinstalled OS want to install the OS as shown in the table below.
- When customers who have used the one shown in “Applicable Version” below want to update the version.
- It is unnecessary to install this system monitor when customers have used the type with a preinstalled OS other than the one shown in “type with a preinstalled OS” below.
- After installing this system monitor once, it is not possible to uninstall.
- Windows® XP Embedded users need to set the write filter to “Protect OFF” by using EWFSettingTool and then restart the system before the installation.
- When this System Monitor is installed, all setting in System Monitor Property are returned to the default settings. When you have changed the default settings, make the settings once again after the version upgrade.
| Title |
System Monitor for PL3000 Series |
| File Name |
PL3000_SystemMonitor_117a.exe |
| File Size |
3,685KB |
| Version |
1.17a |
| Supported OS |
- Windows® 2000
- Windows® XP
- Windows® XP Embedded
* Windows® XP only for the PL3000 SSD model |
| Description |
This is a System Monitor for PL3000 Series.
After installing this program, you can use the state monitor function of the hardware. |
| Updated Contents |
Ver. 1.17a (Jun. 13, 2011)
The following issue was updated:
- S.M.A.R.T. monitoring information was updated.
|
| Applicable Version |
When customers use the following version, update is required.
->
How to confirm your Software Revision
HDD Type with a preinstalled OS
| Model |
Software Revision |
Volume Label |
APL3000-HD60-W2K-CD-BLD
APL3000-HD250-W2K-CD-BLD |
[-] to [D] |
APL3KCD2KJ1 to APL3KCD2KJ6 |
APL3000-HD60-WXP-CD-BLD
APL3000-HD250-WXP-CD-BLD |
[-] to [D] |
APL3KCDXPJ1 to APL3KCDXPJ6 |
APL3000-HD60-WXP/ML-CD-BLD
APL3000-HD250-WXP/ML-CD-BLD |
[-] to [D] |
APL3KCDXPM1 to APL3KCDXPM6 |
APL3000-HD60-W2K-CM-BLD
APL3000-HD250-W2K-CM-BLD |
[-] to [D] |
APL3KCM2KJ1 to APL3KCM2KJ6 |
APL3000-HD60-W2K/ML-CM-BLD
APL3000-HD250-W2K/ML-CM-BLD |
[C] to [D] |
APL3KCM2KM4 to APL3KCM2KM6 |
APL3000-HD60-WXP-CM-BLD
APL3000-HD250-WXP-CM-BLD |
[-] to [D] |
APL3KCMXPJ1 to APL3KCMXPJ6 |
APL3000-HD60-WXP/ML-CM-BLD
APL3000-HD250-WXP/ML-CM-BLD |
[-] to [D] |
APL3KCMXPM1 to APL3KCMXPM6 |
SSD Type with a preinstalled OS
| Model |
Software Revision |
Volume Label |
| APL3000-SD16-WXP-CD-BLD |
[D] |
APL3KCDXPJ5 |
| APL3000-SD16-WXP/ML-CD-BLD |
[D] |
APL3KCDXPM5 |
| APL3000-SD16-WXP-CM-BLD |
[D] |
APL3KCMXPJ5 |
| APL3000-SD16-WXP/ML-CM-BLD |
[D] |
APL3KCMXPM5 |
XP Embedded
| Model |
Software Revision |
Volume Label |
| APL3000-XPE2G-CD-BLD |
[-] to [B] |
PL3KCDXPEM1 to
PL3KCDXPEM3
|
| APL3000-XPE2G-CM-BLD |
[-] to [B] |
PL3KCMXPEM1 to
PL3KCMXPEM3
|
When customers use the following product, installation is required.
Type without the preinstalled OS
| Model |
| APL3000-HD60 |
| APL3000-HD60-BLD |
| APL3000-HD250 |
| APL3000-HD250-BLD |
| APL3000-SD16 |
| APL3000-SD16-BLD |
->
How to confirm your Software Revision
|
Installation (This file is self-extracting.)
- Click "PL3000_SystemMonitor_117a.exe" and download it to the appropriate folder.
- Double-click the downloaded file. (Any extraction destination will do.)
- When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
- Double-click the "PL3000_SystemMonitor_117a.exe" file that is extracted in Step 2 above to start the install.
- Complete the install by following the messages on the window.
- Restart the panel computer.
- After the restart, click OK if the following message is displayed: "The constitution was changed. Start configuration." The restart process will be executed again automatically.
Update History:
[Ver. 1.17a] (Jun. 13, 2011)
The following issue was updated:
- S.M.A.R.T. monitoring information was updated.
[Ver. 1.17] (Oct. 26, 2010)
The following issue has been changed.
- S.M.A.R.T. error message -> S.M.A.R.T. warning message
The following function has been added.
- Function to support the product with the SSD
[Ver. 1.14b] (Jun. 9, 2010)
The following issue was corrected:
- The backlight burnout error may be mistakenly detected in some cases.
The following issue was updated:
- S.M.A.R.T. monitoring information was updated.
[Ver. 1.14a] (Oct. 17, 2008) The following function has been added:
- The threshold for CPU voltage monitoring is settable according to each CPU's specifications.
[Ver. 1.14] (Jul. 28, 2008)
The following function has been added:
- Battery unit has been supported.
The following issue was corrected:
- The RAS output's inversion switch in the main unit did not work.
[Ver. 1.13] (Feb. 18, 2008)
The following function has been added:
- Models with liquid crystal panel have been supported.
The following issue was corrected:
- The task tray icons might not be changed successfully.
Last Updated: Jun. 13, 2011
Posted: Oct. 5, 2007
|
