PL Series
>PL3000 Series >Battery Unit Driver for PL3000 Series
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
- Install this driver in the following case only:
- Customers, who have purchased a PL3000 Series with the built-in battery unit, use the applicable model shown in the table below.
- Please do not install it in the device which does not incorporate a dedicated battery unit option.
| Title |
Battery Unit Driver for PL3000 Series |
| File Name |
PL3KBatteryUnit_09042008.exe |
| File Size |
1,896KB |
| Version |
1.01 |
| Supported OS |
|
| Description |
This is a driver for PL3000 Series with the built-in battery unit.
By installing this driver, the battery monitoring function is added to the System Monitor. Therefore, batch monitoring can be performed and an additional feature performs shut down operation when a power failure occurs. |
| Updated Contents |
Ver. 1.01 (Oct. 17, 2008)
The following issue was corrected:
- The service startup of the battery unit could not be performed normally.
|
| Applicable Model |
Following Models with the dedicated battery unit option are applicable for the update:
HD with a preinstalled OS
| Model |
Software Revision |
Volume Label |
| APL3000-HD60-WXP-CD-BLD |
[B] |
APL3KCDXPJ3 |
| APL3000-HD60-WXP-CM-BLD |
[B] |
APL3KCMXPJ3 |
HD without the preinstalled OS
| Model |
Added Option |
| APL3*00-*-*-*-*-B* |
Dedicated battery unit (without HD) |
| APL3*00-*-*-*-*-*60*-B* |
Dedicated battery unit + HD 60GB version without an OS preinstalled |
| APL3*00-*-*-*-*-*250*-B* |
Dedicated battery unit + HD250GB version without an OS preinstalled |
* stands for an arbitrary character designated at the time of purchase.
|
Installation (This file is self-extracting.)
- Click "PL3KBatteryUnit_09042008.exe" and download it to the appropriate folder.
- Double-click the downloaded file. (Any extraction destination will do.)
- When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
- Double-click the "PL3KBatteryUnit_09042008.exe" file that is extracted in Step 2 above to start the install.
- Complete the install by following the messages on the window.
- Restart the panel computer.
Update History:
[Ver. 1.01] (Oct. 17, 2008)
The following issue was corrected:
- The service startup of the battery unit could not be performed normally.
Last Updated : Oct. 17, 2008
|
