 |
| Free Software |
 |
 |
| > Transfer Tool (GP-Pro EX) |
|
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
This Transfer Tool is a software program that allows you to download and upload screen and logic data from HMI, without the screen editor software, GP-Pro EX.
* About functions of Transfer Tool --> Reference Manual
|
< Caution >
Be sure to download the installer file.
After downloading, start installation using the file on the computer to be installed.
If a network drive is used, installation cannot be performed normally.
This file is very large. Downloading over a slow connection will require a long time. |
| |
|
|
|
Installation Procedure (This file is self-extracting.)
Prior to installation, be sure to close all software applications that
are running. |
| 1. |
Click on the link "TRANSFER301100.exe" in the box above to download the file to the desired folder. |
| 2. |
After the download is finished, double-click on the "TRANSFER301100.exe" file to open it. |
| 3. |
Follow the installer program's directions. |
* About functions of Transfer Tool --> Reference Manual |
Last Updated : Jan. 30, 2012
Posted : April 25, 2011 |
|
