Pass-Through
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista
| Title |
Pass Through Function Installer |
| Version |
Ver. 1.01.07 |
| File Name |
Setup.exe |
| File Size |
8,886KB |
| Applicable Software |
GP-Pro EX Ver. 1.10.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”. |
| Related Units |
- GP4100 Series
- GP3000 Series
- IPC Series for WinGP (GP-Pro EX Ver. 2.00.000 or later)
- General PCs for WinGP (GP-Pro EX Ver. 2.10.000 or later)
|
| Manual |
For details, please read the following
PDF: com_psth.pdf ( 694KB ) |
| Updated Contents |
Ver. 1.01.07 (Dec. 7, 2009)
The following settings were added:
The following issues were corrected:
- When the safety remove USB driver during Pass-Through connection, the application error is occurred.
|
Installation (This file is self-extracting.)
Prior to installation, be sure to close all software applications that are running.
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file's icon to start the installer program.
- Follow the instructions given.
- After installation, please restart the computer.
Update History:
[Ver. 1.01.07] (Dec. 7, 2009)
The following settings were added:
The following issues were corrected:
- When the safety remove USB driver during Pass-Through connection, the application error is occurred.
[Ver. 1.00.06] (Jun. 4, 2009)
The following issues were corrected:
- For use with an Ethernet connection, pressing "Config" or "Delete" button while connecting to a display unit nonexistent in the network (waiting status for timeout) may cause the Pass-Through Configuration Tool to be inoperative.
- For an Ethernet connection, if the Ethernet cable is disconnected during a search for a display unit,
the Pass-Through Configuration Tool may get an application error.
- Cannot connect with PLC when using Mitsubishi Electric Corporation A Series CPU Direct driver.
[Ver. 1.00.04] (Aug. 28, 2008)
The following OS was supported:
The following issues were corrected:
- The computer freezes when shift to Standby, Sleep or Hibernate at the time of Pass-Through function use.
- Pass-Through Configuration Tool freezes when search them again while searching display(s).
- The same display is found several times when search display on the computer which use plural ethernet cards.
[Ver. 1.00.03] (May. 29, 2008) The following issues were corrected:
- When computer has plural network cards, a forced case to be finished has Pass-Through Configuration Tool.
- The indication by the English OS had omitted character(s).
[Ver. 1.00.02] (Apr. 8, 2008) The following issues were corrected:
- The computer froze during the installation of the virtual COM driver.
- When start Pass-Through Configuration Tool and DDE client at the same time, DDE client does not work normally.
- When GP connected by Pass-Through function shifted to Offline-Mode, the connection of the Pass-Through function does not recover.
[Ver. 1.00.01] (May 31, 2007)
- Possible to install Virtual COM Bus Driver / Virtual COM Port Driver in a system than this installer.
- Possible to set the number of Virtual COM Port(s).
- Modified detect that cannot use other COM ports for by user authority except Administrator authority when installed a Virtual COM Bus Driver.
Last Updated : Dec. 7, 2009
Posted :May. 31, 2007
|
