Driver Download
>PLCs >JTEKT Corporation TOYOPUC CMP-LINK SIO Driver
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista/7
→ Precautions for adding a new driver at Daylight Saving Time
| Title |
JTEKT Corporation TOYOPUC CMP-LINK SIO Driver |
| Version |
Ver. 1.14.03 |
| File Name |
TOY_LSIO.exe |
| File Size |
908KB |
| Applicable Software |
GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”. |
| Related Devices |
- TOYOPUC-PC2
- TOYOPUC-PC3J
- TOYOPUC-PC3JT
|
| Related Units |
- GP3000 Series
- GP4100 Series
GP-4106, GP-4107 (GP-Pro EX Ver.2.60.000 or later)
GP-4104 (Ethernet Multilink only)(GP-Pro EX Ver.2.70.000 or later)
- GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
- GP4000 Series (GP-Pro EX Ver. 3.00.000 or lator)
- IPC Series for WinGP
(GP-Pro EX Ver. 2.00.000 or later)
- General PCs for WinGP
(GP-Pro EX Ver. 2.10.000 or later)
|
| Device/PLC Connection Manual |
For details, please read the following
PDF:toy_lsio.pdf ( 3,101KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual". |
| Updated Contents |
Ver. 1.14.03 (Jan. 30, 2012)
The following setting was added:
|
Installation (This file is self-extracting.)
- Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file's icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
- After installation, execute GP-Pro EX.
- Click on the Device / PLC area's [JTEKT Corporation] selection and select [TOYOPUC CMP-LINK SIO].
- *
- When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.14.03] (Jan. 30, 2012)
The following setting was added:
[Ver. 1.13.03]
The following issue was corrected:
- If "16ms" or more value is specified for Wait To Send, the communication error occurs.
[Ver. 1.13.02]
The following settings were added:
- GP4100 Series were supported.
* GP-Pro EX Ver. 2.60.000 or later is necessary to use a GP-4106 or GP-4107.
* GP-Pro EX Ver. 2.70.000 or later is necessary to use a GP-4104 (Ethernet Multilink).
- GP4000M Series were supported.
* GP-Pro EX Ver. 2.71.000 or later is necessary to use a GP4000M Series.
- GP4000 Series were supported.
* GP-Pro EX Ver. 3.00.000 or later is necessary to use a GP4000 Series.
[Ver. 1.12.02] (Feb. 14, 2008)
The following setting was added:
- Support Read/Write function of watch time.
Last Updated : Jan. 30, 2012
Posted : Feb. 14, 2008
|
