Driver Download
>PLCs >Siemens AG SIMATIC S7 Ethernet Driver
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista/7
→ Precautions for adding a new driver at Daylight Saving Time
| Title |
Siemens AG SIMATIC S7 Ethernet Driver |
| Version |
Ver. 1.15.08 |
| File Name |
SIES7TCP.exe |
| File Size |
866KB |
| Applicable Software |
GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”. |
| Related Devices |
- S7-200 Series
- S7-300 Series
- S7-400 Series
- S7-1200 Series
- LOGO! Series
|
| Related Units |
- GP3000 Series
- GP4100 Series (GP4104: GP-Pro EX Ver. 2.70.000 or later)
- GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
- GP4000 Series (GP-Pro EX Ver. 3.00.000 or later)
- IPC Series for WinGP (GP-Pro EX Ver. 2.00.000 or later)
- General PCs for WinGP (GP-Pro EX Ver. 2.10.000 or later)
|
| Device/PLC Connection Manual |
For details, please read the following
PDF: sies7tcp.pdf ( 282KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
|
| Updated Contents |
Ver. 1.15.08 (Mar. 16, 2012)
The following setting was added:
- LOGO! Series is supported.
|
Installation (This file is self-extracting.)
- Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file's icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
- After installation, execute GP-Pro EX.
- After installation, click on the Device/PLC area's [Siemens AG] selection and select [SIMATIC S7 Ethernet].
- *
- When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.15.08] (Mar. 16, 2012)
The following setting was added:
- LOGO! Series is supported.
[Ver. 1.14.08] (Jun. 22, 2011)
The following setting was added:
- S7-1200 Series is supported.
The following issue was corrected:
- When a wrong device code is specified in Indirect Designation, access be made to an inappropriate device.
[Ver. 1.13.07] (Apr. 25, 2011)
The following setting was added:
- Support GP4100 Series
*To use a GP4100 Series, Ver. 2.70.000 or later versions of GP-Pro EX are necessary.
[Ver. 1.12.07] (Dec. 8, 2009)
The following issue was corrected:
- Inputting 32 or more characters in the device address field in the address input screen in the Device Monitor may cause the Display freeze.
[Ver. 1.12.06] (Jan 22, 2009) The following issue was corrected:
- When GP-Pro/PB III project is converted.
The device address is converted to "-Undefined-".
[Ver. 1.12.05] (Jun 18, 2008) The following content has been improved:
- Processing of divided packet.
[Ver. 1.12.04] (Aug 31, 2007) The following setting was added:
- S7-200 Series is supported.
[Ver. 1.11.04] (Jun. 14, 2007)
The following setting was added:
- OP Communication is supported.
[Ver. 1.11.03] (Jan. 9, 2007) The following setting was added:
- Support for DeviceMonitor.
*Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.
[Ver. 1.10.03] (Nov. 28, 2006) The following issue was corrected:
- Monitoring a bit address from Pro-Server EX causes the ON/OFF status to be indicated incorrectly in each bit of the monitored value.
[Ver. 1.10.02] (Jul. 3, 2006) The following issue was corrected:
- The improper address is displayed when sampling is specified
Last Updated : Mar. 16, 2012
Posted : Jun. 14, 2007
|
