Driver Download

>PLCs >Schneider Electric SA MODBUS SIO Master Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.

 Download

Title Schneider Electric SA MODBUS SIO Master Driver
Version Ver. 1.14.07
File Name MOD_SIOM.exe
File Size 1,032KB
Applicable Software The required versions of software for this driver installer are as follows.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Related Devices
  • Micro Series
  • Premium Series
  • Twido Series
  • Quantum Series
  • Momentum Series
  • Modicon M221 Series
Related Units Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below.

Model Required driver version
GP3000 Series Ver. 1.00.01 or later
GP3000 Series (Handy Type) Ver. 1.11.06 or later
ST3000 Series Ver. 1.10.05 or later
LT3000 Series Ver. 1.13.07 or later
GP4100 Series (GP4105, 4106) Ver. 1.12.06 or later
GP4100 Series (GP4104:
Ethernet Multilink only)
Ver. 1.12.06 or later
GP4100 Series (GP4115, 4116) Ver. 1.13.07 or later
GP4100 Series (GP4114:
Ethernet Multilink only)
Ver. 1.13.07 or later
GP4000M Series Ver. 1.12.06 or later
GP4000 Series Ver. 1.12.07 or later
LT4000M Series Ver. 1.13.07 or later
SP5000 Series Ver. 1.13.07 or later
IPC Series for WinGP Ver. 1.10.05 or later
General PCs for WinGP Ver. 1.12.05 or later
Device/PLC Connection Manual For details, please read the following
PDF:mod_siom.pdf ( 7,586KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents Ver. 1.14.07 (Jun. 28, 2018)
The following functions were added:
  • Cartridge and IO module for M221 is supported. (Revise the connection manual)

Installation (This file is self-extracting.)

  1. Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX/Pro-Server EX.
  6. After installation, click on the Device/PLC area's [Schneider Electric SA] selection and select [MODBUS SIO Master].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Update History:

[Ver. 1.14.07] (Jun. 28, 2018)

The following functions were added:
  • Cartridge and IO module for M221 is supported. (Revise the connection manual)

[Ver. 1.14.07] (Apr. 26, 2018)

The following device was supported:
  • Modicon M221 Series is supported.

[Ver. 1.13.07]

The following functions were added:
  • LT3000 Series is supported.
  • USB-RS 422/485 conversion adapter is supported.

[Ver. 1.12.07]

The following settings were added or revised:
  • GP4000 Series is supported.
  • A maker name is revised from “Schneider Electric Industries” to “Schneider Electric SA”.

[Ver. 1.12.06]

The following setting was added:
  • GP4100 Series is supported.

[Ver. 1.10.06] (Jun. 18, 2008)

The following content has been improved:
  • Write Command check processing

[Ver. 1.10.05] (Aug. 31, 2007)

The following settings were added:
  • Support for Device Monitor.
    * Ver 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor.
  • Lower Security Level is supported.
  • Single Bit manipulation to Coil/Discrete Input is supported.

[Ver. 1.10.04] (Jul. 31, 2006)

The following setting was added:
  • IEC61131 address Syntax is supported.

[Ver. 1.10.03] (May 12, 2006)

The following setting was added:
  • "Bit manipulation (set/reset) to Holding Register" setting.

Last Updated :Jun. 28, 2018
Posted: May 12, 2006

Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use
Copyright (c) 1996-2018 Schneider Electric Japan Holdings Ltd. All Rights Reserved.