Driver Download
> PLCs >Rockwell Automation, Inc. DF1 driver
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
| Title |
Rockwell Automation, Inc. DF1 Driver |
| Version |
Ver. 1.12.06 |
| File Name |
ROC_DF1F.exe |
| File Size |
803KB |
| Applicable Software |
GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
You can check your version by ” Help ” function → ” Version Info ”. |
| Related Device |
- SLC500 Series
- PLC-5 Series
- ControlLogix Series
- MicroLogix Series
- CompactLogix Series
|
| Related Units |
- AGP3000 Series
- IPC Series for WinGP
(GP-Pro EX Ver. 2.00.000 or later)
|
| Manual |
For details, please read the following
PDF:roc_df1f.pdf ( 821KB ) |
| Updated Contents |
Ver. 1.12.06 (Jun. 9, 2008)
The following settings were added:
- Supported Pass-Through.
- The Double Word word order can be selected as compatible settings with GP-PRO/PB3.
The following issues were corrected:
- When write 114 words in Half-Duplex to PLC-5 or ControlLogix, communication is stopped.
- T-device, C-device, and R-device in the bit specification could not be read normally with the device monitor of Pro-Server EX and simulation of GP-Pro EX.
|
Installation (This file is self-extracting.)
- Please confirm that supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident program such as virus detection program, etc.
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file's icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
- After installation, execute GP-Pro EX.
- After installation, click on the Device/PLC area's [Rockwell Automation, Inc.] selection and select [DF1].
- *
- When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to your own Device/PLC Connection Manual.
Update History:
[Ver. 1.12.06] (Jun. 9, 2008) The following settings were added:
- Supported Pass-Through.
- The Double Word word order can be selected as compatible settings with GP-PRO/PB3.
The following issues were corrected:
- When write 114 words in Half-Duplex to PLC-5 or ControlLogix, communication is stopped.
- T-device, C-device, and R-device in the bit specification could not be read normally with the device monitor of Pro-Server EX and simulation of GP-Pro EX.
[Ver. 1.11.05] (May. 31, 2007)
The following issue was corrected:
- When execute the Device Monitor with other driver form Pro-Server EX, GP3000 had rebooted.
[Ver. 1.11.04] (Jan. 9, 2007) The following setting was added:
- Supported DeviceMonitor.
*Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.
The following issues were corrected:
- Float Device L/H of PLC-5, which was incorrect.
- When "38400" was specified for communication speed , the screen operation response (e.g. window display) became extremely slow.
- When "0" was specified for Send Wait, the screen update stopped.
[Ver. 1.11.03] (Nov. 28, 2006)
The following issue was corrected:
- When monitoring PLC value from Pro-Server EX, an illegal value is displayed.
[Ver. 1.11.02] (Aug. 1, 2006)
The following issue was corrected:
- REAL Device L/H which was incorrect.
Last Updated : Jun 9, 2008
|
