Driver Download
>PLCs >Mitsubishi Electric Corporation Q Series QnU CPU Ethernet Driver
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista
→ Precautions for adding a new driver at Daylight Saving Time
| Title |
Mitsubishi Electric Corporation Q Series QnU CPU Ethernet Driver |
| Version |
Ver. 1.12.02 |
| File Name |
MIT_QNUE.exe |
| File Size |
765KB |
| Applicable Software |
GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
You can check your version by ”Help” function -> ”Version Info”. |
| Related Devices |
- Built-in Ethernet I/F on a QnU Series CPU Module
|
| Related Units |
|
| Manual |
For details, please read the following
PDF:mit_qnue.pdf ( 517KB ) |
| Updated Contents |
Ver. 1.12.02 (Sep. 9, 2010)
The following issue was corrected:
- When one external device connected with four or more display units via UDP communication, a communication error may occur.
|
Installation (This file is self-extracting.)
- Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file’s icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
- After installation, execute GP-Pro EX.
- After installation, click on the Device/PLC area’s [Mitsubishi Electric Corporation] selection and select [Q Series QnU CPU Ethernet].
- *
- When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to your own Device/PLC Connection Manual.
Update History:
[Ver. 1.12.02] (Sep. 9, 2010)
The following issue was corrected:
- When one external device connected with four or more display units via UDP communication, a communication error may occur.
[Ver. 1.12.01] (May. 14, 2010)
The following issues were corrected:
- When the motion CPU is accessed, the address out-of-range error may occur.
- When write the multiple bit value using Pro-Server EX, the address out-of-range error may occur.
- When write the multiple bit value using Pro-Server EX, the second or later bit aren't reflected to PLC.
[Ver. 1.12.00] (Nov. 12, 2009) The following settings were added:
- The internal relay (M device) and link relay (B device) extended address areas have been supported.
- Improvement has been done so that supported CPUs are accessible even when unsupported CPUs exist in the Multi-CPU system.
[Ver. 1.11.00] (Feb. 25, 2009) New
Last Updated : Sep. 9, 2010
Posted : Feb. 25, 2009
|
