Driver Download

>PLCs >Mitsubishi Electric Corporation A Series Computer Link Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.

 Download

Note:

Precautions for adding a new driver onto Windows Vista

Title Mitsubishi Electric Corporation A Series Computer Link Driver
Version Ver. 1.13.03
File Name MIT_ALNK.exe
File Size 902KB
Applicable Software GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
You can check your version by ”Help” function -> ”Version Info”
Related Devices
  • MELSEC AnA Series
  • MELSEC AnN Series
  • MELSEC QnA Series
  • MELSEC Q Series A Mode
Related Units
Manual For details, please read the following
PDF:mit_alnk.pdf ( 1,438KB )
Updated Contents Ver. 1.13.03 (Mar. 29, 2010)
The following Restrictions apply:
  • Supported Serial Multilink function
    * Ver. 2.50.000 or later version of GP-Pro EX is necessary to use a Serial Multilink function.
The following issue was corrected:
  • Using the Serial Multilink function, the display may not pass the token to other displays when the screen is changed.

Installation (This file is self-extracting.)

  1. Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX.
  6. After installation, click on the Device/PLC area's [Mitsubishi Electric Corporation] selection and select [A Series Computer Link].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to your own Device/PLC Connection Manual.

Update History:

[Ver. 1.13.03] (Mar. 29, 2010)

The following issue was corrected:
  • Using the Serial Multilink function, the display may not pass the token to other displays when the screen is changed.

[Ver. 1.13.02] (Dec. 7, 2009)

The following setting was added:
  • Supported Serial Multilink function
    * Ver. 2.50.000 or later version of GP-Pro EX is necessary to use a Serial Multilink function.
The following issue was corrected:
  • When value of “Wait To Send” is more than 16(ms). PLC send the an error code.

[Ver. 1.12.02] (Aug. 4, 2008)

The following setting was added:
  • Support for Ladder Monitor.
    * Ver. 2.00.000 or later version of GP-Pro EX and
    "Mitsubishi Electric A Series PLC Ladder Monitor (Model: EX-LADM-MIT-A01)" are necessary to use a Ladder Monitor.

Last Updated : Dec. 7, 2009
Posted : Aug. 4, 2008

| Return to Top | | Back | HOME |
Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use | Prop 65
Copyright (c) 1996-2018 Schneider Electric Japan Holdings Ltd. All Rights Reserved.