Driver Download
>Device Data Copy Tool
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista/7
→ Precautions for adding a new driver at Daylight Saving Time
| Title |
Device Data Copy Tool |
| Installer Version |
Ver. 1.00.007 |
| File Name |
DataCopy.exe |
| File Size |
31,333KB |
| Applicable Software |
GP-Pro EX Ver. 2.20.000 or later
To check your version, go to the "Help" menu -> "Version Info". |
| Compatible OS |
- Microsoft Windows 2000 Professional (SP3 or later)
- Microsoft Windows XP
- Microsoft Windows Vista
- Microsoft Windows 7
|
| Compatible Driver |
YASKAWA Electric Corporation MP/SERVO Ethernet Driver Ver. 1.12.00 or later |
TOSHIBA MACHINE CO.,LTD. TC Series (TCmini/TC200) Driver Ver. 1.11.01 or later |
| Data Copy Tool Version |
Ver. 1.01.00 |
Ver. 1.01.02 |
| Related Device |
|
- TC200 Series
- TC200S Series
- TCmini Series
|
| Related Units |
- GP3000 Series
- LT3000 Series
- GP4100 Series (GP-Pro EX Ver. 2.70.000 or later)
- GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
- IPC Series for WinGP
- General PCs for WinGP
|
- GP3000 Series
- GP4100 Series (GP-Pro EX Ver. 2.60.000 or later)
- GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
- IPC Series for WinGP
- General PCs for WinGP
|
| Manual |
For details, please read the following
PDF:yas_tsee.pdf ( 386KB ) |
For details, please read the following
PDF:tem_tsee.pdf ( 727KB ) |
| Updated Contents |
- |
[Ver. 1.00.02]
The following issues were corrected:
-
If ladder program where "Subroutine
Command", "Task Command" and
"Interrupt Command" are used.
A sequence error occurs after data
is transferred to a PLC.
|
| Update History |
[Ver. 1.01.00] (Jul 27, 2010)
The following issues were corrected:
- User can select the register data transfer when roading.
- Supported MECHATROLINK-III
- Supported GP4100 Series
- Supported GP4000M Series
|
[Ver. 1.00.01]
The following setting was added:
- Supported GP4100 Series.
- Supported GP4000M Series.
[Ver. 1.00.00]
NEW |
Installation (This file is self-extracting.)
- Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file's icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
-
Update History:
[Ver. 1.00.007] (Oct. 6, 2011)
TOSHIBA MACHINE CO.,LTD. TC Series (TCmini/TC200) was updated.
[Ver. 1.10.003] (Jul. 27, 2010) New
Last Updated : Oct. 6, 2011
Posted : Jul. 27, 2010
|
