Home   Technical Resources

Driver Download

>Temperature Controllers >Yamatake Corporation Digital Controller SIO Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.

 Download

Title Yamatake Corporation Digital Controller SIO Driver
Version Ver. 1.12.02
File Name YTK_CPLS.exe
File Size 1,198KB
Applicable Software GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
You can check your version by ” Help ” function → ” Version Info ”.
Related Device
  • SDC10 Series
  • SDC15 Series
  • SDC20 Series
  • SDC21 Series
  • SDC25 Series
  • SDC26 Series
  • SDC30 Series
  • SDC31 Series
  • SDC35 Series
  • SDC36 Series
  • SDC40A Series
  • SDC40B Series
  • SDC40G Series
  • SDC45 Series
  • SDC46 Series
  • DMC10 Series
  • DMC50 Series
  • DCP31 Series
  • DCP32 Series
  • DCP551 Series
  • DCP552 Series
  • CMC10B Series
Related Units
  • GP3000 Series
  • IPC Series for WinGP (GP-Pro EX Ver. 2.00.000 or later)
  • General PCs for WinGP (GP-Pro EX Ver. 2.10.000 or later)
Manual For details, please read the following
PDF:ytk_cpls.pdf ( 2,460KB )
Updated Contents Ver. 1.12.02 (Mar. 3, 2008)
The following setting was added:
  • The list of the reference to the parameter of the SDC45 series and the SDC46 series is updated.

Installation (This file is self-extracting.)

  1. Prior to installing the driver, close all your personal computer applications, including any resident program such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX.
  6. After installation, click on the Device/PLC area's [Yamatake Corporation] selection and select [Digital Controller SIO].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to your own Device/PLC Connection Manual.

Update History:

[Ver. 1.12.02] (Mar. 3, 2008)

The following setting was added:
  • The list of the reference to the parameter of the SDC45 series and the SDC46 series is updated.

[Ver. 1.12.01] (Nov. 29, 2007)

The following settings were added:
  • Added SDC45, SDC46, DMC50 and CMC10B to related device.
  • Performed the performance improvement of the data reading and writing of
    SDC15, SDC25, SDC26, SDC35, SDC36 and DMC10 series.

[Ver. 1.11.01] (Oct. 1, 2007)

The following setting was added:
  • Device monitor is supported.
    *Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.

Last Updated : Mar. 3, 2008

| Return to Top | | Back | HOME |
Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use
© Copyright 2004-2014. Pro-face. All rights reserved.