Driver Download
|
Please acknowledge the following terms of use before you use our download service. Download of any file
signifies your agreement to the terms of use.
Terms of Use
- Digital shall retain all intellectual property rights to the files that Digital provides for this service.
- You may download and use any file for non-profit purposes or for personal use within the organization to which you belong.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file
that Digital provides for this service shall be prohibited.
- This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition
at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista
| Title |
CANopen Slave EDS file |
| Version |
File version. 1, File revision. 2 |
| File Name |
CANOPENS_EDS.exe |
| File Size |
1,206KB |
| Object driver |
CANopen Slave |
| Related Devices |
- AGP3000 Series (CANopen Master)
- LT3000 Series (CANopen Master)
- Schneider Premium Series
- Schneider Twido Series
|
| Related Units |
|
→ Related file: CANopen Slave Driver
Installation (This file is self-extracting.)
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file's icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
This installer's default setup folder is C:\Fieldbus
| File name |
Notes |
| PFCA9-CANAL_0100E.eds |
This is the EDS file for the CANopen Slave unit(CA9-CANALL/EX-01), used with the AGP3000 Series. |
- *
- For general information regarding Device connections and documentation conventions please refer to your own Device/PLC Connection Manual.
Update History:
[File version. 1, File revision. 2] (Jun. 12, 2009) New
Last Updated : Jun. 12, 2009
Posted :Jun. 12, 2009
|
