> Drivers  > USB Data Transfer Cable (CA3-USBCB-01) Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.


The USB Data Transfer Cable (CA3-USBCB-01) driver is included with GP-Pro EX development software. When a CA3-USBCB-01 data transfer cable is plugged into a USB port on the PC, the driver should be detected automatically after installation of GP-Pro EX software or the Transfer Tool.

- Please use the USB Data Transfer Cable (CA3-USBCB-01) driver in the following environment.
- Reconnect the cable or reboot the PC if the USB Data Transfer Cable doesn't work or data is not transferred.
USB Data Transfer Cable (CA3-USBCB-01) Driver
File Name
Size 9 KB
Supported OS Windows 2000 Service Pack 4; Windows XP; Windows Vista; Windows 7 (32-bit and 64-bit)
Supported Software
GP-Pro EX - all versions

Installation Procedure
Prior to installation, be sure to close all software applications that are running.
1. Click on the link "" in the table above to download the file to the desired folder.
2. After the download is finished, double-click on the "" file to open it.
3. Designate a directory to extract (unzip) the file, and then click OK.
4. The driver will be saved in the "CA3-USBCB-01Driver" folder created in the designated directory.
5. Connect the USB data transfer cable to the PC. When the New Hardware Wizard starts, point it to the "usbdlc.sys" file in the CA3-USBCB-01Driver folder.
6. Confirm the installation using the following procedures:
1. Right-Click on "My Computer" and choose "Properties".
2. Choose the "Hardware" tab and then click "Device Manager".
3. Double-click "Universal Serial Bus Controllers"
4. "USB Link Cable (CA3-USBCB-01)" will be in the list if the driver is installed properly.

Last Updated : Oct. 30, 2012
| Return to Top | | Back | HOME |
Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use | Prop 65
Copyright (c) 1996-2018 Schneider Electric Japan Holdings Ltd. All Rights Reserved.